GeBE-MULDE Mini
GPT-4352(-60)
7.2
SERIAL INTERFACE
The suitable interface cable has be connected to socket (3/fgure 3) and on the other side directly to a RS232 connection
(COM interface of a PC).
Alternatively also a one-side open cable with 5 single wires is available (see chapter 4.3.2 OPTIONAL ACCESSORIES AND
SPARE PARTS, page 9).
Only peripherals that meet the requirements for safety low-voltage (SELV) with limited power according to EN/IEC 60950 may be
connected to the interfaces and DC circuits of the printer.
7.2.1 PIN ASSIGNMENT
Connection J201 (GCT-4393) / J2 (GCT-4392)
Pin
Signal
Input/Output
1
GND
-
2
TxD
I
3
RxD
O
4
RTS
I
5
CTS
O
Socket:
JST SM05B-SRSS-TB J201 / J2
Mating connector: JST SHR-05V-S
AWG 32 - 28
7.2.2 TIMING OF SERIAL INTERFACE RS232
Default time refers to the graphics:
ATTENTION:
the standard confguration has 1 stop bit
ATTENTION:
the standard confguration has no parity bit
1 character: (1 start, 8 data, 1 parity, 1 stop)
Signal
Level on TTL interface
Level on V.24 (RS232) interface
"1" (Mark)
+ 5 V (TTL-level)
-3 V ... -12 V
"0" (Space)
0 V (TTL-level)
+3 V ... +12 V
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. GPT-4352-A8-E-SMAN-V1.3-0627
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
May 23, 2018
Beethovenstraße 15
page 15 | 22
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
