GeBe 570752, Руководство пользователя

Страница: 15 / 28

14 15
English English
CONTENTS
Introduction ................................................ 14
Safety information ....................................... 14
Safety information and symbols......................18
Special Requirements ....................................15
Component identification .............................. 15
Engine Type & Serial Number ........................ 15
Control........................................................16
Alternating current (AC) connection ................17
Battery charging...........................................18
Starting the engine .......................................19
Stopping the engine ......................................20
Maintenance ................................................21
Storage .......................................................23
Troubleshooting ............................................23
Specifications ...............................................24
Warranty .....................................................28
EC declaration of conformity ..........................28
SAFETY INFORMATION
Do not use it indoors.
Do not use it in a wet
condition.
The generating set
must not be connected
to other power sources,
such as the power
company supply main.
Don’t add fuel near
the flammable thing or
cigarette.
Keep the machine
clean and avoid spilt
combustibles including
gasoline on it.
Turn the generator
“OFF’’ when add fuel.
Keep children and pets
away from the area of
operation. Do not place
flammable objects
close to the outlet
valve when generator
operation.
Keep it at least
1m away from
inflammables.
SPECIAL REQUIREMENTS
Electrical equipment,including lines and plug
connections should be free from being bare. The
circuit breakers should match with the generator
equipment. If the circuit breakers require
replacement, they must be replaced with a circuit
breaker of the same ratings and performance
characteristics. Don’t operate the generator before
grounding. If using extension lines, the requirement
should be met as following:
• for 1.5mm 2 , the line should not be exceeded 60m;
• for 2.5mm
2
, the line not exceeded 100m.
COMPONENT IDENTIFICATION
ENGINE TYPE & SERIAL NUMBER