background image

The settings of the back paddles are automatically saved in the current profile. To save 
individual settings to the back paddles, switch to another profile (there are 4 memoryslots 
available). When the gamepad is turned on, the last active profile will always be loaded.

To disable the paddles:

Turn onthe gamepad and connect it to the console.

Enter the setting mode by pressing and holding
the gamepad buttons:

Then press and hold one of the paddles and wait until
the light goes out, do the same to disable the second
paddle.

To enable the paddle enter the setting mode (step 2)
and repeat the same action as for deactivation.

The indicator will start 
blinking white rapidly.
Wait for the indicator 
to light up constantly.

To save/load a profile with settings:

Turnonthe gamepad (it is possible during the game).

Enter the profile management mode byclicking
and holding the buttons on the gamepad:

Toload and switch to another profile, you must select
and hold one of the 4 buttons:

The indicator will start blinking rapidly.
Wait until the indicator goes off. The profile is loaded.

The indicator will start 
blinking white rapidly.
Wait for the indicator 
to light up constantly.

Отзывы: