GearBest VC-S1603, Руководство пользователя

Страница: 9 / 9

Filter cleaning
Filter should be rinsed clean at last twice a year or when it becomes visibly dirty.
Always operate the cleaner with fi ilter installed and locked safely into place.
Otherwise, this may reduce suction or damage the motor.
1. Disconnect from eletrical outlet before cleaning ilter, and allow device to cool
down completely.
2. Remove the dust bowl from the motor unit of the device.
3. Remove the ilter and rinse it under cool tap water.
4. Tap ilter to remove thoroughly any water remanining in the fi ilter, and let it dry
completely for 24 hours (by natural airing and not near the fire or any high temperature
objects) before refi itting in to the vacuum cleaner.
ATTENTION: Do not clean your ilter in awashing machine and do not use a hair dryer
or any heating source for drying it.
Important: The ilter should be checked regularly for signs of damage, preferably after
each cleaning task. The ilter must be replaced immediately if it becomes damaged,
Always disconnect the vacuum cleaner from the electrical outlet before checking the
ilter
TROUBLESHOOTING
Problem Possible cause Proposed solution
Weak suction Dust in the f ilter Clean the f ilter from dust
Dust bowl full Empty dust bowl
Obstacles in the openings Remove all obstacles
ofthe device
Appliance is not working
The plug is not connected Connect the plug of the appliance to
to the main wall socket the main wall socket.
Overheat of the body of
the device.
Slight temperature rising on
the accessible surfaces of the
device is normal during use.
In case of higher temperature
rise, check that the device
suction nozzled and openning
of the device are not blocked. Check all openings of the device and
remove obstacles that block and
prevent air circulation.
f
f
f
f
f
f
f
f
f
f