Ready for flight
1. Place the aircraft in a wide open space, with the rear facing you.
2. Put all the switch in the remote controller to the UP position,
release all the trim buttons and function buttons, move the throttle
to the lowest position, then turn on the remote controller.
3. If you have a video receive equipment(such as a 7 inch screen,
glass, etc) please turn on the equipment and set the receive channel
to the correct channel, then turn it on.
07
Motor Unlock/Lock
Motor Unlock
After power on the remote controller and aircraft, the rear
indicator LED will be constant green, that means the flight
controller initialization finished.
Gently push the throttle stick down and move the rudder(YAW)
stick to the right side and hold for more than 2 seconds(On
the mode 2 the throttle and YAW stick is the same stick), you
will see the rear LED becomes constant blue, means the
motors are unlocked. Be very careful at this point, as pushing
the throttle stick will start the motors.
The unlock method shown as below
FuriBee F90 Wasp Mini RC Racing Quadcopter user manual
