Blind to your remote controller
04
The FuriBee Mini quadcopter has a build-in receiver, which
can support DSM2/DSMx type remote controller. If you get
a version that without a remote controller, you need do a
blind process.
1). Power on the quadcopter and wait for about 3s
,
the
LED
on
the
receiver
will
flash
quickly
,
it
means
that
the
receiver
in
blinding
mode
；
2). According to the user manual of the remote controller, do
the correct steps to blind to your receiver.
*For Mkron i6, you just push the blind switch before powering
on the remote controller.
3). After blind successful, the LED on the receiver will be
constant on.
4). Using a Micro USB cable connect the quadcopter to your
PC and run the Betaflight-Configuration, then change the table
to “Receiver”, moving the sticks to check the endpoint and the
Reverse of each channel.
5).After set the remote controller success, you need set the
flight Mode appropriately
if
necessary
using
the
Betaflight-Configuration
tool
.
Blinding Process
(Remote Controller setting)
(Flight Mode setting)
FuriBee F90 Wasp Mini RC Racing Quadcopter user manual
