Gear4music SDP-1, Руководство пользователя

Страница: 8 / 26

8
CONNECTIONS
USING HEADPHONES
The SDP-1 has a 1/4” output jack (PHONES) for con-
necting standard stereo headphones. Control the
output volume level using the main master volume
wheel. The internal speaker system is automatically
muted when a pair of headphones is plugged into
the PHONES jack.
USING AN EXTERNAL SOUND SYSTEM
The LINE OUT (R) and (L)(MONO) phono sockets
can be used to connect the piano to an external
sound system, such as a keyboard amplifier, inter-
face, or mixer. When using one cable (for mono
output), insert your cable into the (L)(MONO) out-
put. Connecting two cables sends separate left and
right audio signals down each cable, giving you
stereo output.
USING USB MIDI
The SDP-1 allows the transfer of MIDI via USB from
the piano to an audio interface or “host.” Use the
audio interface to control the MIDI signal.
SUSTAIN PEDAL
A foot pedal can be connected to your digital
piano that, when held down, allows the sound of
the notes played to decay slowly, or “sustain.” The
sustain input will auto-detect the polarity of the
sustain pedal used. Ensure the piano is turned off
before connecting the pedal, otherwise it may not
be recognised properly by the piano. To change
the polarity of the pedal, hold the foot pedal down
during power up.
USING DC POWER INPUT
The power input is used to connect the piano to
mains power. Only use the included power supply
unit (PSU).
USING BATTERY POWER
Ensure all batteries are inserted correctly, as indi-
cated by the +/- polarity markings. Replace all the
batteries at the same time. Do not combine old and
new batteries and do not mix battery types, as this
can cause overheating, fire, or battery fluid leakage.
Remove the batteries from the instrument if it is not
to be used for a long period of time.
AUX IN
INPUT
OVERDRIVE
LOW GAIN MID HIGH VOLUME 0 10 GA-15
AUX IN
INPUT
OVERDRIVE
LOW GAIN MID HIGH VOLUME 0 10 GA-15
SUSTAIN