5
HARDWARE DESCRIPTION:
INSTALLATION:
1. Turn on your computer.
2. Plug the USB connector of your Webcam into an available USB 2.0 port on your computer.
3. Insert the enclosed Software CD into the CD-ROM drive of your computer.
4. The Webcam Driver will start automatically. If it does not start automatically, please click
“
Start
”, then “
Run
…”, type “
D:\Setup.exe
” into the dialog box. (NOTE: “
D
:\” represents the
drive letter assigned to the CD-ROM drive you are using. If
D
is not the letter assigned to
your CD-ROM drive, please replace
D
with the appropriate drive letter). Then click “
OK
”.
5. The “
Vimicro USB 2.0 UVC PC Camera – InstallShield Wizard
” will appear on the
desktop.
6. Follow the on-screen instructions to finish the installation. Please restart your computer after
the installation is finished.
7. You will find the “
amcap
” icon on your desktop.
8. Your webcam is now ready to be used.
Lens
Built-in
Microphone
Snapshot
Button
LED Brightness
Adjust Switch
