STEP 5
Removal of the chassis from the
case for service
NOTE:
If it becomes necessary to remove the
chassis from the case, the following procedure
should be performed.
1.
Remove the two thumb screws securing
the transition duct to the bottom of the duct
adapter.
2.
Carefully slide the transition duct forward to
remove it from the chassis.
3.
Remove the room cabinet front.
4.
Remove the chassis from the case for service.
Transition duct
STEP 4 (continued)
6.
Reinstall the room cabinet front by hooking the
top over the rail along the chassis top. Push it
in at the bottom.
7.
Remove the air filters from room cabinet front.
8.
Slide the transition duct into place under the
adapter and secure it with the two thumb
screws.
Transition duct
Air Filters
STEP 4 (continued)
9.
Reinstall air filters into unit.
Air Filters
4
