GEAppliances JCK3000, Руководство пользователя

Страница: 10 / 17

10
49-80686
Your oven has six rack positions. Recommended rack
positions for various types of foods are provided in the
Cooking Guide. Adjusting rack position is one way to
impact cooking results. For example, if you would prefer
darker tops on cakes, muffins, or cookies, try moving
food one rack position higher. If you find foods are too
brown on top try moving them down next time.
When baking with multiple pans and on multiple racks,
ensure there is at least 1 1/2" between pans to allow
sufficient space for air to flow.
Flat Racks
When placing and removing cookware, pull the rack out
to the bump (stop position) on the rack support.
To remove a rack, pull it toward you, tilt the front end up
and pull it out.
To replace, place the curved end of the rack (stop-locks)
onto the oven supports, tilt up the front of the rack and
push the rack in.
Racks may become difficult to slide, especially after a
self-clean. Put some vegetable oil on a soft cloth or
paper towel and rub onto the left and right edges.
CAUTION:
Never place cooking utensils, pizza or baking stones, aluminum foil or any other
items on the oven floor. There is a heating element beneath the oven floor. Placing items on the oven floor
may cause the oven to overheat, resulting in damage to the oven and risk of damage or fire to cabinets.
Aluminum Foil
Do not use aluminum foil to line oven bottoms. The foil will trap heat below and upset the performance of the
oven. Foil can melt and permanently damage the oven bottom. Damage from improper use of aluminum foil is not
covered by the product warranty.
Foil may be used to catch spills by placing a sheet on a lower rack, several inches below the food. Do not use
more foil than necessary and never entirely cover an oven rack with aluminum foil. Keep foil at least 1-1/2” from
oven walls to prevent poor heat circulation.
Oven Racks
USING THE O
VEN:
O
ven Racks