Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Before you call for service…
GEAppliances.com
39
Problem
Possible Causes
What to Do
Water filter indicated as installed
incorrectly or a leak is present on LCD
screen.
Water filter installed backward or is
leaking.
Check for leak. If no leak is present,
remove filter/bypass plug, rotate 180°
and reinstall.
Water filter indicator light
remains lit after replacing filter
Filter timer has not been reset or filter
is installed backward.
Internal Dispense models:
-Press and hold reset button for 3 seconds
External Dispense models:
-Remove filter and rotate 180 degrees
and reinstall.
Water filter indicator light is not lit
This is normal. This indicator will turn
on to tell you that you need to replace
the filter soon.
See About the Water Filter for more
information.
Handle is loose/handle has a gap.
Handle needs adjusting
See Attach Fresh Food Handle and
Attach the Freezer Handle sections for
detailed instructions.
Refrigerator beeping
This is door alarm
-Turn off or disable with door closed
-If door open and alarm is sounding, you
can only snooze the alarm
Not cooling
The cooling system is off
See About Controls.
Water has poor taste/odor*
Water dispenser has not been used
for a long time
Dispense water, until all water in system
is replenished.
Water in glass is warm*
Normal when refrigerator is first
installed
Wait 24 hours for the refrigerator to
completely cool down.
Water dispenser has not been used
for a long time
Dispense water, until all water in system
is replenished
Water system has drained
Allow several hours for replenished
supply to chill
Water dispenser does not work*
Water supply line turned off or not
connected
See Installing the Water Line
Water filter clogged or filter/bypass
plug not installed
Replace filter cartridge or remove filter
and install bypass plug**
Air may be trapped in the water
system
Press the dispenser arm for at least 5
minutes.
Water in reservoir is frozen because
the controls are set too cold
Set the refrigerator control to a warmer
setting and wait 24 hours. If the water
does not dispense after 24 hours, call for
service
Water spurting from dispenser*
Newly installed filter cartridge
Run water from the dispenser for 5
minutes (about 2 gallons)
*Select Models Only
**Some models do not come equipped with the filter bypass plug. To obtain a free bypass plug, call 800-GECARES.
In Canada call 800.561.3344.
Содержание DFE28
Страница 43: ...NOTES GEAppliances com 43 ...
Страница 91: ...91 Notes electromenagersge ca ...
Страница 137: ...137 Notas GEAppliances ca ...
Страница 138: ...138 Notas ...