
– 83 –
Return Spring
Duct Door Motor
Motor Bracket
Door Bracket
(Continued next page)
Disconnect
127(
Before performing the following step, take
notice of the position of the duct door return spring.
9.
8VLQJDÀDWEODGHVFUHZGULYHUJHQWO\SU\WKH
duct door motor out from the motor bracket.
10. Move the motor, return spring, and duct door as
an assembly to the right, then remove the duct
door from the door bracket at the left.
$FWXDWRU3DGGOH6ZLWFKDQG/RZHU8OWUDVRQLF
6HQVRUV
127(
• The paddle switch is a 2-position switch with
three wires. It has a normally open and a
normally closed contact.
• Both the door board and user interface board
(UI) look for a change of state of both contacts
when the paddle is depressed before the
selected function is activated.
• The door board monitors one of the contacts
and the user interface board (UI) monitors the
other contact.
• The paddle and switch are attached to the
dispenser recess with two top pins and two
bottom tabs located inside.
$FWXDWRU3DGGOHDQG6ZLWFK5HPRYDO
1. Remove the funnel (see
'LVSHQVHU$VVHPEO\
&RPSRQHQWV5HPRYDO
follow steps 1 through
9).
2. Disconnect the actuator switch wire harness.
3.
8VLQJDVPDOOÀDWEODGHVFUHZGULYHUJHQWO\SU\
inward and disengage each top pin from the
dispenser recess and then pull the paddle up.