GEA HG34e, Руководство по обслуживанию

Страница: 21 / 40

21
96
19
4-
05
.2
01
6-
Gb
4 I Checking the compressor parts
Oil filter / suction filter
The filter screen must be in an undamaged condition. Dirt and residues have to be removed.
If necessary, the filter have to be cleanded with compressed air or replaced with new ones.
In case of larger compressor damages which necessitate a complete disassembly of the
compressor, we recommend in principle the replacement of the valve plates, the piston
rings and all seals. Thus, concealed defects of parts which have been in operation may
be prevented.
5 I Assembly of compressor
Assembly of compressor
The assembly of the compressor is explained in separate steps on the following pages. The indicated parts list
positions refer to the spare parts lists, repair set lists, special accessories part lists and is available
online at
www.gea.com. Follow the stated tightening torques of the screws!
You can find the exploded drawing at the end of the maintenance manual.
Preparation: Necessary tools
Pos. Tool Size
1
2
3
4
5 Spanner
Allen key
Needle-nosed pliers
Torque spanner
Piston ring plier SW 10, 13, 14, 17, 19
6 mm, 10 mm