Handling and assembly
Axle assembly
2018-9015-001
09-2016
5.5.3
Weight transfer assembly
If the spreader is equipped with the weight transfer option, proceed with the
following steps on both cylinders of the first axle. If the spreader is not equipped
with the weight transfer option, proceed with the next step.
3
1
2
● Remove the weight transfer hose (1) that is bound under the spreader;
● Take the hose fittings in the bag;
● Remove the air valve adapters (2) from the suspension cylinder;
● Apply Teflon tape over the 90° adapter (3) threads and install it on the bottom
part of the suspension cylinder. Connect the weight transfer hose (1);
● Repeat these steps to connect the second cylinder of the first axle.