Safety
Owner’s obligation of care
7750-9001-058
07-2006
6
2
Safety
2.1
Owner’s obligation of care
The product has been designed and constructed while taking account of a
potential risk analysis and after careful selection of the harmonized standards
and other technical specifications to be complied with. It therefore guarantees
a maximum level of safety.
This safety can only be achieved in practice on the farm however when all of the
necessary measures have been taken. It is part of the owner’s obligation of care
to plan these measures and check that they are carried out.
In particular, the owner must ensure that
D
all personnel who operate, maintain, inspect or otherwise handle this
product read and understand the safety instructions and warnings in this
manual (especially the safety instructions and warnings) and sign to confirm
that they have understood them and will act in accordance with them!
D
Anyone who works or performs activities in connection with the product must
read the manual carefully.
D
A full set of legible instructions is always kept by the product.
D
Anyone who has to carry out work on the product can look at the instructions
at any time.
D
The instructions in the section entitled ”Basic safety instructions” are
observed.
D
The legal requirements are observed.
D
The owner has to produce operating instructions for the farm which are
especially adapted to the conditions of his business, once again expressly
taking account of the safety aspects.
D
The product
- Should only be used for its intended purpose.
- Should only be used if it is in perfect operating condition and, in
particular, the safety equipment should be regularly checked to make
sure it is in perfect operating condition.
