![GEA DemaTron 40T Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/gea/dematron-40t/dematron-40t_instruction-manual-installation-instructions_572302014.webp)
Installation
Safety instructions for installation
7750-9001-058
07-2006
14
5
Installation
If necessary, please contact your nearest authorised WestfaliaSurge dealer.
5.1
Special personnel qualification required for installation
Installation may only be carried out by specially qualified personnel in
accordance with the safety instructions.
All work on electrical equipment and electrical connection work may only ever
be carried out by trained specialist electrical personnel in accordance with the
wiring diagrams in these installation instructions.
Observe local regulations and safety requirements (NEC, UL or CSA, etc.)!
Also see the section on ”Personnel qualification”.
5.2
Safety instructions for installation
To prevent damage to property and/or life-threatening injury to personnel
always observe the following:
D
Before installation, look for any damage caused during transport. Do not use
damaged components!
D
Use only the special tool indicated for assembly.
D
In particular, make sure that the tightening torques specified are complied
with.
D
In the area where the animals stand, all exposed conductive parts of
electrical equipment (components, housing, etc.) and any external
conductive parts which animals could come into contact with must be
connected to each other and to the PE conductor of the installation by
means of additional equipotential bonding.
D
In the case of devices using 24V AC/DC, the power supplies provided by
WestfaliaSurge and permitted for the devices must be used, as otherwise
personal and building protection cannot be guaranteed!
Also read the chapter on ”Safety”.