![background image](http://html2.mh-extra.com/html/ge/zoneline-az28e09dab/zoneline-az28e09dab_owners-manual-and-installation-instructions_4079983012.webp)
BEFORE YOU BEGIN
Installation
Zoneline Air
Instructions
Conditioners
Read these instructions completely and carefully.
•
IMPORTANT –
Save these
instructions for local inspector’s use.
•
IMPORTANT –
Observe all
governing codes and ordinances.
•
Note to Installer –
Be sure to leave these
instructions with the owner.
•
Note to Owner –
Keep these instructions for
future reference.
•
Proper installation is the responsibility of the
installer.
•
Product failure due to improper installation is not
covered under the Warranty.
Questions? Call 800.GE.CARES (800.432.2737)
or
visit our Website at:
ge.com
IMPORTANT ELECTRICAL
SAFETY—READ CAREFULLY
CAUTION:
•
Follow the National Electrical Code (NEC) or local
codes and ordinances.
•
For personal safety, this Zoneline must be properly
grounded.
•
Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are specified
on the nameplate of each unit.
•
Do not use an extension cord with this unit.
•
Aluminum building wiring may present special
problems—consult a qualified electrician.
•
When the unit is in the OFF position, there is
still voltage to the electrical controls.
•
Disconnect the power to the unit before
servicing by:
1 Removing the power cord (if it has one) from
the wall receptacle.
OR
2 Removing the branch circuit fuses or turning
the circuit breakers off at the panel.
Phillips screwdriver
TOOLS YOU WILL NEED
12
ZONELINE COMPONENTS
Exterior grille/louver**
*
* Shipped with the Zoneline unit
** Check the “Essential Elements” list on the unit
Wall case**
Zoneline unit
Room cabinet*
Power supply kit**