manualshive.com logo in svg

GE XL VU, Руководство по эксплуатации

Поделиться
Скачать
GE XL VU Скачать руководство пользователя страница 128

128

 

      

XL 

Vu™ 

VideoProbe

®

Appendix

Additional Certification Testing

Tested to MIL-STD-461F: RS103

Tested to MIL-STD-810G: 506.5, 507.5, 509.5, 510.5, 511.5, 514.6, 

516.6, 521.3

UN / DOT T1-T8

FCC Compliance

 

This device complies with part 15 of the FCC Rules. Operation is subject 

to the following two conditions: 

1)  

This device may not cause harmful interference

2)  

this device must accept any interference received, including  

 

 

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits 

for a Class A digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area 

is likely to cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

Canadian Notice

This equipment does not exceed the Class A limits for radio noise 

emissions as described in the Radio Interference Regulations of the 

Canadian Department of Communications. 

Le present appareil numerique n’emet pas de bruits radioelectriques 

depassant les limites applicables aux appareils numeriques de la classe 

A prescrites dans le Reglement sur le brouillage radioelectrique edicte 

par le ministere des Communications du Canada.

Содержание XL VU






































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды