RESET
l\
i
SMALL
Load Size
Regular
“s”,
.
\
Extra Cleaning
.
●
OFF
‘
mM
’”’
&.
I
Setting the Controls —
Controls and features will vary from model to model (on models so equipped)
Use the Suggested Fabric and Cycle Settings
Select
Temperature.
guide to help you make the proper selections.
Select COLD WASH
if desired, this option
Select a Fabric Care program or Wash Spin Speed.
will cancel the wash temp. in the Fabric Care
Automatically Programmed
Selections.
Wash
Spin
Wash
optional Extra Rinse if desired.
Fabric Care Selections
Speed
Speed
Temp.
Temp.
Cottons Colorfast
Normal
Cottons Non-Colorfast
Normal
Fast
Cold
Permanent Press
slow
*Warm
Cold
Silks
Gentle
slow
Cold
Cold
Washable Woolens
Gentle
Fast
*Warm
*
$
(hand
Select Water
SMALL: Washer is less than 1/3 full of clothes.
MEDIUM: Between 1/3 and 1/2 full.
LARGE: Between 1/2 and 2/3 full.
EXTRA LARGE: Over 2/3
HANDWASH: Not used for regular loads. See
How to Use the Handwash System.
Pressing pad
provide a second deep rinse
with Regular, Permanent Press & Knits and Extra
Cleaning settings. Pressing the pad Extra Rinse Off
will cancel the selection.
In model
select
Reset
Options pad to cancel the selection.
End Cycle Signal. Select this signal to remind
you to remove clothes from the washer when the
cycle ends. Signal
sound and then stop. See
the End
Signal section.
Reset Options pad. On model
pressing the
Reset
Options pad will
any
selected option.
Push Cycle Selector knob in and turn clockwise to
your selected wash setting.
Pull Cycle Selector knob
If you wish to increase the water level after you’ve
out to start the washer.
If
made a selection, turn knob to RESET and select new level.
you wish to change setting
after washer has started, push
Cycle Selector knob into stop
,\ ‘
STOP
the washer and reset to the new
position. Setting can be changed at any time.
7
