Recording a Program
Your VCR provides different recording options. These options are explained in this section of the manual.
Recording Speeds
Press
SPEED
on the remote to select a recording speed (SP or SLP). The speed
you select appears on the TV screen. Tapes recorded in LP can be played in this
VCR.
SP (Standard Play)
gives the best quality recording. That is why most
prerecorded, rental tapes are recorded in SP. Fewer programs can be recorded
on the tape. Special effects such as pause, frame advance, slow motion, and
picture search work well in this speed.
SLP (Super Long Play)
gives three times the recording time of tapes recorded
in SP. Special effects such as pause, frame advance, slow motion, and picture
search work well in this speed.
Normal Recording
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TVÕs
video input channel.
1.
Insert a tape with its safety tab in place.
2.
If you are using one of the basic hookups, make sure the
VCR
indicator
lights in the VCRÕs display panel. If not, press
TV•VCR
to turn it on.
3.
Use
SPEED
on the remote to select a recording speed.
The tape speed indicator appears on the TV screen.
4.
Select the channel to be recorded.
The channel number appears on the TV screen.
5.
Press
RECORD
on the VCR or
REC
on the remote to begin recording.
The
RECORD
indicator lights in the VCRÕs display panel while the VCR is
recording.
Watch a TV Channel While VCR is Recording a Different Channel
For some cable box hookups, this recording feature may not apply. Contact
your local cable company for assistance.
1.
Follow steps
1
through
5
above.
2.
If you are using one of the basic hookups, press
TV•VCR
to switch to the
TV channel.
The
VCR
indicator turns off in the display panel.
3.
Select the channel you want to watch with the TVÕs channel buttons.
4.
Press
STOP•EJECT
on the VCR or
STOP
on the remote when the
recording is finished.
Recordings
Recording Time
Cassette
SP SLP
T-120
2Hrs
6Hrs
T-160
2Hrs 40Min
8Hrs
20
