GE VG4065 Скачать руководство пользователя страница 47

Страница: 47 / 68

CONNECTIONS

Things to Know Before
Connecting Components

Protect Your Components from
Power Surges

•

Connect all components before plugging any
power cords into the wall outlet.

•

Always turn off the TV and other components
before you connect or disconnect any cables.

Position Cables Correctly to Avoid
Audio Hum or Interference

•

Insert all cable plugs firmly into their jacks.

•

Place the audio/video cables to the sides of the
TV’s back panel instead of straight down the
middle after you connect your components.

•

Try not to coil any twin-lead cables and keep
them away from the audio/video cables as much
as possible.

•

Make sure all antennas and cables are properly
grounded. Refer to the Safety T ips sheet packed
with your unit.

Protect Your Components from
Overheating

•

Do not block ventilation holes in any of the
components. Arrange the components so that air
can circulate freely.

•

Do not stack components.

•

Allow adequate ventilation when placing your
components in a stand.

•

Place an amplifier or satellite receiver on the top
shelf of the stand so heated air rising from it will
not flow around other components.

➣

SETTING UP THE VCR

FIRST THINGS FIRST

➣

RECORDING

VCR BASICS

➣

OTHER FEATURES

CONNECTIONS

➣

PROGRAM THE REMOTE

➣

REFERENCE

Things to Know Before
Connecting
Components

Содержание VG4065





































































Результаты поиска

Содержание VG4065

Отзывы:

GE VG4065, Руководство пользователя, Страница: 47 / 68

Результаты поиска

Содержание VG4065

Отзывы: