GE Versana Balance, Базовое руководство по обслуживанию

Страница: 169 / 431

Connectivity setup
Versana Balance – Basic Service Manual System view 3-89
5808768-100 English Rev.9
3-9-6 How to Setup and Use a DICOM Image Storage Service
An Image Storage Service provides a place to store patient and
exam data from Versana Balance and corresponding images.
The Image Storage Service, or the device that hosts it, is often
called a Patient Archiving and Communication System (PACS).
Table 3-31: Setup an Image Storage Service
1 In
Utility -> Connectivity -> Service
, from the Destination Device drop-down menu,
select the device on which the service resides. (This assumes you have already setup
the device in the Device tab in ‘How to Setup and Use a DICOM Image Storage
Service’ on
page 3-89 .
2 From the
Select Service Type to add
drop-down menu, select
DICOM Image Storage
and press Add .
3 Change the name of the service to one of your choosing.
4 Enter the AE Title and port Number of the service. AE Title is case-sensitive.
4 Save your changes and then press
Verify
. A “Smiley Face” indicates successful
communication with the service.
Note: If you get a successful Ping (Smiley Face) at the device level but not at the service level, it
is possible that the AE Title or Port Number of the service settings are incorrect. Ensure that
these are correct then re-verify. Be sure that the service type (Store, Print, etc) is correct and
supported by the device.