2
31-1000617 Rev. 0
Installation Instructions
INSTALLING PUMP KIT
(Cont.)
DISCONNECT ELECTRICAL POWER
1
REMOVE SIDE PANEL
Ŷ
Use a drill or a Phillips screwdriver to remove the
2 screws from the access panel as shown in figure
below. Slide the panel in the direction shown to
remove.
2
REMOVE DRAIN TUBING
Ŷ
Remove the plastic snap ring from the white drain
pipe. Move the ring sides up and down as shown
to unlock and remove. Save this ring.
Ŷ
Remove the white drain pipe by pulling it down
from the 2 locations shown.
3
INSTALL RUBBER PAD TO NEW
PUMP
Ŷ
Peel the white sticker from the rectangular rubber
pad and attach the sticky side to the drain pump.
WARNING
Electrical Shock Hazard
Death or serious injury can result from failure to
follow these instructions.
• Service by a qualified service technician only.
• Disconnect power before servicing this product.
• Reconnect all grounding devices after service.
• Replace all parts and panels before operating.
Screws
Access
Panel
Slide panel in
this direction
White Sticker
Rubber Pad -
Sticky side up
Snap
Ring
White
Drain
Pipe
