Questions? Call 800.GE.CARES (800.432.2737) or visit our Web site at: GEAppliances.com
Installation
Drain
Pump
Instructions Kit UPK4
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT –
Save these
instructions for local inspector’s use.
•
IMPORTANT –
Observe all governing
codes and ordinances.
•
Note to Installer –
Be sure to leave these
instructions with the Consumer.
•
Note to Consumer –
Keep these
instructions for future reference.
• Skill
level
– Installation of this appliance requires
basic mechanical skills.
•
Proper installation is the responsibility of installer.
•
Product failure due to improper installation is not
covered under the Warranty.
WHAT YOU WILL NEED:
3/8” open/box wrench or adjustable wrench
Drill with phillips head bit or #2 Phillips screwdriver
Slip joint pliers
Side cutting pliers
31-1000617 Rev. 0 10-21 GEA
1
2
4
6
7
3
5
8
KIT CONTENTS:
1 - Drain Pump (1)
2 - Rubber Pad (1)
3 - Hardware [bolts (2), spring washer (2),
washer (2), pressure switch assembly
screw (1), ground screw (1)]
4 - PVC Drain Pipe (1)
5 - Plastic Snap Ring (1)
6 - Discharge tubing (clear)
7 - Large Metal Clamp (1)
8 - Small Metal Clamp (1)
NOTE:
This pump can be installed in a cube ice machine or
a nugget ice machine.
