Operation instructions
12
1. Install a 9-volt battery (K) (included ).
Note: to prevent damage to transmitter
(J), remove the battery if not used for long
periods.
7. Warm weather - (Switch to the left -
Counterclockwise direction) A downward
air flow creates a cooling effect as shown.
This allows you to set your air conditioner
on a higher setting without affecting your
comfort.
2. Restore power to ceiling fan and test for
proper operation.
8. Cool weather - (Switch to the right -
Clockwise direction) An upward air flow
moves warm air off the ceiling are as
shown. This allows you to set your heating
unit on a lower setting without affecting
your comfort.
6. The reverse switch is located on the top
of motor housing. Slide reverse switch to
change fan rotation. Slide the switch to
the left for warm weather operation. Slide
the switch to the right for cool weather
operation.
Note: wait for fan to stop before reversing
the direction of the blade rotation.
9. Select a location to install your
Transmitter holder (L). Attach the
transmitter holder (L) with the two short
wood screws (N) provided.
9
V
ol
t
Ba
tt
ery
L
N
K
J
4. “0” button: This button turns the fan off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
5. button: test for proper operation.
This button controls the light and also
controls the brightness setting. Press and
release the button to turn the light ON
or OFF. Press and hold the button to set
the desired brightness. The light key has
an auto-resume; it will stay at the same
brightness as the last time it was turned off.
3. “1, 2, and 3 buttons: These three buttons
are used to set the fan speed as follows:
1 = high speed 2 = medium speed 3 = low
speed
1
2 3
0
1
2 3
0
1
2 3
0
Forward
Reverse
