GE Transport PT878, Краткое руководство

Страница: 66 / 97

August 2008
4-4 Managing Site Files
The New Option (cont.)
2. To begin entering a name for the new site, use the four arrow keys
to scroll to the desired letter or number, and press
[ENTER]
.
3.
Repeat the previous step until you have created a site name of up
to eight characters.
Note: At any time, you may press
[F1] (Delete)
to remove the last
character entered.
4.
When you have finished, press
[F3] (OK)
to accept the name, or
press [F2] (Cancel) to leave the window without creating a new site.
If you pressed
[F3]
above, a window similar to that in Figure 4-5
below appears.
Figure 4-5: Template Confirmation Window
You must now decide if you want to use the site that was highlighted
in the
Site Manager window (see Figure 4-2 on page 4-2) as a
template for the new site:
•
Press
[F2]
(No) if you do not want to use the selected site as a
template (you will use the current setup data instead)
•
Press
[F3]
(Yes) if you do want to use the selected site as a template
for the new site
After you make your selection, the meter returns to Operate Mode ,
and the new site name is shown in the upper left corner of the display.
A B C D E F G H
I J K L M N O P
Q R S T U V W X
Y Z 0 1 2 3 4 5
6 7 8 9
New Site
No
Yes
New Site
Use the selected site
‘DEFAULT.SIT’ as a template?