background image

18

 

Before you call for service…

Troubleshooting Tips 

 

Save time and money! Review the charts on the following 

pages first and you may not need to call for service.

Problem

Possible Causes

What To Do

Refrigerator does not 

operate

Refrigerator in defrost cycle.

Wait about 30 minutes for defrost cycle to end.

Temperature control dial in OFF 

position.

Move the temperature control dial to a temperature setting.

Refrigerator is unplugged.

Push the plug completely into the outlet.

The fuse is blown/circuit breaker is 

tripped.

Replace fuse or reset the breaker. 

Vibration or rattling (slight

 

vibration is normal)

Roller screws or leveling legs need 

adjusting.

See 

Rollers and Leveling Legs

.

Fresh food or freezer 

compartment too warm

Temperature control dial not set cold 

enough.

See 

About the temperature control dial

.

Warm weather or frequent door 

openings.

Set the temperature control dial one step colder. See 

About 

the temperature control dial.

Door left open.

Check to see if package is holding door open.

Package blocking air duct in freezer 

compartment.

Check to see if package is blocking air duct in freezer 

compartment.

Motor operates for 

long periods or cycles 

on and off frequently. 

(Modern refrigerators 

with more storage space 

and a larger space and 

a larger freezer require 

more operating time. 

They start and stop 

often to maintain even 

temperatures.)

Normal when refrigerator is first 

plugged in.

Wait 24 hours for the refrigerator to completely cool down.

Often occurs when large amounts of 

food are

 

placed in refrigerator.

This is normal.

Door left open.

Check to see if package is holding door open.

Hot weather or frequent door 

openings.

This is normal.

Temperature control dial set at the 

coldest setting.

See 

About the temperature control dial.

Grille and condenser need cleaning.

See 

Care and cleaning.

Frost or ice crystals

 

on 

frozen food (frost within 

package is normal)

Door left open.

Check to see if package is holding door open.

Too frequent or too long door 

openings.

Automatic icemaker does 

not work (on some models)

Icemaker is not on.

Move the feeler arm to the 

ON

 (down) position, or move the 

power switch to the 

ON

 position

Water supply turned off or not 

connected.

See Installing the water line.

Freezer compartment too warm.

Wait 24 hours for the refrigerator to completely cool down.

Piled up cubes in the storage bin 

cause the icemaker to shut off.

Level cubes by hand.

Frequent “buzzing” sound

 

supply

 

to the refrigerator 

has not been connected

Icemaker is on but the water

  

Move the feeler arm to the 

STOP

 (up) position, or move 

the 

power switch to the 

OFF

 position,

 

Keeping it 

 

on will 

damage the water valve..

Cubes too small

Water shutoff valve connecting 

refrigerator to water line may be 

clogged.

Call the plumber to clear the valve.

Slow ice cube freezing

Door left open.

Check to see if package is holding door open.

Temperature control dial not set cold 

enough.

See 

About the temperature control dial.

Содержание TOP-FREEZER 17

























Отзывы: