1997 REFRIGERATORS
GLOBAL NEW GENERATION
SxS
© General Electric Company 1997
19
Pad Switch Actuator
To remove the pad switch actuator--
first remove the control housing. Then,
press the actuator out of the notch and
hole at the rear of the control housing.
To reinstall the pad switch actuator--
position it into the hole and notch at the
rear of the control housing so that the
actuator paddle is behind the switch
lever. Firmly press the actuator to seat
it into the notch. Caution: verify
operation of the switch by rotating the
actuator. Reinstall the control housing,
escutcheon, pad support, and pad.
Ice Deflector
To remove the ice deflector-- remove
the control housing and the pad switch
actuator. Grasp the rear edge of the
ice deflector and pull it from the control
housing.
To reinstall the ice deflector-- position
the flap below the rear edge of the ice
funnel and engage the channel over the
rear edge of the control housing. Press
