GE T2100-ST1, Руководство оператора

Страница: 42 / 50

Preventive Maintenance
42 T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V 2097937-001 Rev E
12 June 2017
Running Belt Tension Adjustment
The running belt may stretch and loosen with regular use. This
looseness is noticeable when the belt tends to hesitate or stick.
Adjust the tension on the belt by following the procedure and
referring to the illustration below.
1.
Turn the treadmill’s power switch to ON.
2. Start the treadmill and increase to 1 mph (1.6 km/h).
3. Start walking on the treadmill, grabbing side handrail and
applying pressure with your foot to create resistance on the
running belt.
4. If the running belt hesitates or slips on the front drive roller,
tighten both tension bolts ½ turn (clockwise).
5. Repeat steps 2 thru 4 until the running belt stops slipping.
NOTE:
When the running belt is too tight, the edge of belt will
curl, causing premature running belt failure.
Item Description
1 Adjustment Bolts
Drive Belt Tension Adjustment
NOTE:
Because this adjustment is not covered under your warranty ,
refer to "Drive Belt Tension Adjustment" in the Preventive
Maintenance chapter of the T2100-ST1 / T2100-ST2 Field
Service Manual.
NOTE:
If there are indications that the drive belt has stretched and
become loose, contact your in-house biomedical technician,
or contact GE Medical Systems
Information Technologies and
open a customer-billable service call.
1