0150-0229B
10
Calibur StoreSafe
1.7 The Back Panel
B
RS-232/1
AUX
RS-485/1
10/100
ETHERNET
RS-485/2
RS-232/2
1
5
2
6
3
7
9
4
8
10
12V DC
1
2
4
5
6
3
7
10
8
9 11
1. Camera Inputs:
BNC connector, looping. Auto Terminating.
2. Composite Monitor-A Output:
Composite video output with BNC style connector.
3. Composite Monitor-B Output:
Composite video output with BNC style connector.
4. Alarm I/O:
For connecting alarm inputs, and alarm output relays.
5. Power Input:
For connecting the power supply.
6. Aux Port:
For connecting the Accessory PCB for Audio inputs and outputs. Advanced models
only.
7. RS232 Port 1:
For modem connection and external control of the unit.
8. RS485 Port 1 Connector:
For connecting to keyboard and other RS485 devices. Not used on
standard model.
9. 10/100 Ethernet Port:
For connecting to remote PC via ethernet network.
10. RS485 Port 2 Connector:
For connecting to keyboard and other RS485 devices. Not used on
standard model.
11. RS232 Port 2:
For Event Generation and ASCII Text insertion. Not used on standard model.
Camera Inputs
Cable:
75-Ohm Coaxial
Connectors:
BNC
Auto Terminating:
Yes
Passive Looping:
Yes
There are two BNC jacks for each camera. Either
jack can receive a camera signal. The signal is
looped (directly connected to the other jack), making
the camera signal available to other equipment.
The camera input connectors are Auto Terminating.
This means that the input signal will automatically be terminated with 75-Ohms unless a 2
nd
cable is
connected to the 2
nd
BNC connector of the same camera input. Make sure there is 75-Ohm
termination at the end of the video line if the signal is looped through StoreSafe.
Time base correction is performed during digital capture. As a result, cameras do not require
synchronization.
See section 3.13 for information about disabling unused camera jacks in the menu system.
Composite Monitor Output
When connecting directly from StoreSafe to the
monitor, select the 75-Ohm impedance setting on the
monitor.
Cable:
75-Ohm Coaxial
Connectors:
BNC
If an additional device is connected to the monitor’s looping output, set the termination of the additional
device as 75-Ohm, and set the termination of the monitor as Hi-Z (High Impedance).
Содержание StoreSafe SDVR-10
Страница 6: ...0150 0229B 6 Calibur StoreSafe ...
Страница 73: ...0150 0229B ...