Sensors have to be learned in certain groups for their unique attributes to be effective
such as, entry/exit delays, 24 hour smoke detector, instant alarms, etc. to do this refer to
page 7 in your installation manual under recommended sensor groups and choose what
group best describes your application and type for each individual sensor, Example,
Entry/exit door sensor would be in group 10, and a smoke sensor would be in group 26.
So, after you have learned in a sensor, the “grp” will be flashing, just scroll up/down till
you get to the group number you need and press enter. Next it will be flashing front door,
just scroll up/down to find a description that best describes your area that is being
protected, and if there is not one you can scroll further choosing letters to customize your
application, then press enter. Then it gives you another blank to ad some customized info,
after you have completed this press enter again, now it want you to trip the next sensor
and define its group, continue until you have no more sensors and press the status button
about 4 times which will save your information and back you out to the clock.
Setting entry/exit delay times
Scroll up/down to system programming press enter, now enter your 4 digit installer code
which is 4321 by default, now scroll to timers and press enter, now scroll to entry or exit
delay and go up or down to program the delay times that will be flashing and press enter
when desired time appears.
Changing master/installer codes
Scroll up/down to system programming. Press enter and your installer code and then
press enter, now you’re at access codes, press enter again. You can change, installer and
master codes plus add up to 8 user codes.
Programming phone numbers
Scroll up/down to system programming, press enter and your installer code and press
enter again. Now scroll up/down to phone #’s and press enter, you see phone #1 press
enter and then the number (just like you’d have to call it from a regular phone), then press
enter, it will say phone#2 and do the same, you can enter up to 4 numbers.
Then go into "reporting" then "report comm modes" and set each phone to "voice dialer"
* Note, to get the option for certain functions, delay times, chime feature, etc. you must
select a group that will utilize the attribute. *
Created by:
Alarm System Store
http://alarmsystemstore.com
Created by:
Alarm System Store
http://alarmsystemstore.com
