REPLACING THE FREEZER DOOR
(cont.)
Hang the freezer door front onto open slots
on the sides.
Tighten screws completely. (There are four
10 mm hex-head bolts.)
REPLACE THE FREEZER BASKET
Replace the freezer basket by lowering it into the frame.
B
C
Slot
Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
REMOVE THE FREEZER DOOR
(cont.)
Use the tip of a screwdriver to separate the rail from
the rail cover. Tilt the front end up and lift the entire door.
Set the door front on a nonscratching surface.
Push the rail assemblies back into the cabinet.
CAUTION:
Push both sides of the rail
assemblies back at the same time.
E
F
G
REPLACING THE FREEZER DOOR
Two people may be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
Pull out the rail assemblies to the full length on each side
of the cabinet.
CAUTION:
Make sure to pull out the side
rails evenly.
30
A
7
8
8
Содержание SIDE-BY-SIDE REFRIGERATOR 26
Страница 46: ...46 ...
Страница 138: ...138 Notas Solucionar problemas Servicio al consumidor Operación Seguridad Instalación ...