D
Front adjustment of the photocell position: Is accomplished via a level
located
on either side of the Film Holder Assembly. Five positions are available to suit patient
anatomy.
Note:
An Up/Down button is located on the cover of the x-ray Tube/Housing Assembly.
Note:
The optional Positioning Arm Up/Down Control Footswitches are located on the
right and left sides of the Senographe. See below for symbols meaning:
'623+96%
'623+3/
'6+/4&**
9&'6+/4&**
The Positioning Arm Control Buttons (
= in rotation,
= Up/Down) are located
at the top and bottom of each handrail. A protecting rim prevents patient access to the
buttons.
The Film Holder Assembly can travel 761 mm thru 1451 mm at a focal distance of 660 mm.
Rotation thru 360 degrees (+180 degrees thru -180 degrees) is available.
Note:
I86 warning message will appear if the compression paddle is touched during
rotation of the positioning arm.
Refer to Chapter 3, Section 3 “Messages” for further explanation.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).