Operating Instr
uctions
Installation Instr
uctions
Tr
oubleshooting Tips
Consumer S
uppor
t
Safety Instr
uctions
24
About the dryer control panel
5
6
7
For regular to heavy cottons.
For synthetics, blends and items labeled permanent press.
For delicates, synthetics and items labeled
Tumble Dry Low
.
HIGH
MEDIUM
LOW
This option may only be used with
COTTONS
or
MIXED LOAD
cycles. This option reduces
certain types of bacteria by 99.9%, including:
Staphylococcus aureus, Pseudomonas
aeruginosa
and
Klebsiella pneumoniae*
. The anti-bacterial process occurs when high
heat is used during a portion of this drying cycle.
NOTE:
Do not use this cycle on delicate fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol
P154 Sanitization Performance of Residential Clothes Dryers
.
Dry Temp
You can change the temperature of your dry cycle.
ANTI-BACTERIAL
(on some models)
For lingerie and special-care fabrics.
START
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer.
Press it again to restart the dry cycle.
My Cycle
(on some models)
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
To store a MY CYCLE combination of settings:
1.
Select your drying cycle.
2.
Change
DRY TEMP
and
SENSOR DRY LEVEL
settings to fit your needs.
3.
Select any drying
OPTIONS
you want.
4.
Press and hold the pad for three seconds to store your selection. A beep will sound
and the pad will light up.
To recall your stored MY CYCLE combination:
Press the
MY CYCLE
button before drying a load.
To change your stored MY CYCLE combination:
Follow steps 1–4 in
“To store a MY CYCLE combination of settings”
.
“CLEAN LINT FILTER” (message)
(This message represents only a reminder.)
After the
POWER
button is pressed, the “CLEAN LINT FILTER”
message could appear if the previous
cycle was not finished.
This message will disappear after the
START
button is pressed. Even though you have already cleaned
the filter (before or after the POWER button has been pressed), the “CLEAN LINT FILTER”
message will
still be displayed until the START button is activated.
AIR FLUFF
(NO HEAT)
EXTRA LOW
Can only be used with
TIMED DRY
.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers