Safety Rules
1
READ AND SAVE THESE INSTRUCTIONS
1.
To reduce the risk of electric shock, ensure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
WARNING: To reduce the risk of
fire, electric shock or personal
injury, mount fan to outlet box
marked acceptable for fan
support with the screws
provided with the outlet box.
WARNING: To reduce the risk
of personal injury, do not bend
the blade arms (also referred
to as flanges), when installing
the brackets, balancing the
blades or cleaning the fan. Do
not insert foreign objects in-
between rotating fan blades.
WARNING: To reduce the risk of
fire, electric shock or personal
injury, mount to outlet box
marked “acceptable for fan
support of 15.9 kg (35 lb.) or
less” and use mounting screws
provided with the outlet box.
Most outlet boxes commonly
used for the support of light
fixtures are not acceptable for
fan support and may need to be
replaced. Due to the complexity
of the installation of this fan, a
qualified licensed electrician is
strongly recommended.
Min. 7ft/2.13m
Min. 30in/76cm
2.
All electrical connections must be made in accordance
with local codes, ordinances and/or the National Electric
Code. Electrical installation should be performed by a
qualified licensed electrician.
3. WARNING:
to reduce the risk of electrical shock or fire, do
not use this fan with any solid-state fan speed control device.
It will permanently damage the electronic circuitry.
4. CAUTION:
To reduce the risk of personal injury, use only
the screws provided with the outlet box.
5.
The weight of the fan is 6.7 kg (14.77 lb). The outlet box
and support structure must be securely mounted and capable
of reliably supporting a minimum of 15.9 kg (35 lb.). Use only
cUL Listed outlet boxes marked “FOR FAN SUPPORT.”
6.
The fan must be mounted with a minimum of 2.1m (7 ft .)
clearance from the trailing edge of the blades to the floor.
7.
Avoid placing objects in the path of the blades.
8.
To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the fan.
9.
Do not use water or detergents when cleaning the fan or
fan blades. A dry dust cloth or lightly damped cloth will be
suitable for cleaning.
10.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into
the outlet box. The wires should be spread apart with
the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and ungrounded
conductor on the other side of the outlet box.
11.
All screws must be checked and re-tightened where
necessary during installation.
12.
This fan is suitable for room sizes up to 225 square feet
(20.9 square meters).
