GE RM94940, Инструкция по эксплуатации

Страница: 13 / 40

12
Programming For AUX 1 or AUX 2 Buttons
With the AUX 1 and AUX2 buttons, you can assign a
second TV, DVD, CD player, VCR, Satellite System, or
Cable Box to it.
1. Manually turn on the
device you wish to control.
Find the three digit code
for the device you wish to
program in the code list at
the back of the instructions.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then release
the CODESEARCH button.
3. Press and release the
AUX 1 or AUX 2 button
(The INDICATOR LIGHT
will blink then remain lit.)
4. Enter the code using
the Number Buttons. After
your code is entered, the
INDICATOR
LIGHT will turn off. If the
code is not valid, the INDI-
CATOR LIGHT will blink.
Check the code list and
repeat process.
5. Aim the remote at the
device you wish to control
and press the ON•OFF
button. The device should
turn off.
6. With your device on,
press CHAN+ (CHANNEL
UP) button. If the device
responds, no further pro-
gramming is required.
NOTE: If your device does
not respond, try all the
codes for your brand. If the
codes do not work, or your
brand is not listed, try the
Code Search method on
page 12.
7. Enter your code and
the type of device you
programmed here for easy
reference.
AUX 1 CODE
AUX 2 CODE
94940 Revised Size 10/18/02 12:22 PM Page 13