background image

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical 

shock, injury to persons, or damage when using the air 
conditioner, follow basic precautions, including the 
following:  

•  

Read all of the instructions before using this appliance. 

•  

Plug into a grounded 3 prong outlet. 

•  

Do not remove ground prong. 

•  

Do not use an adapter. 

•  

Do not use an extension cord. 

•  

Do not operate the air conditioner if it has a damaged 

cord or plug, if it is not working properly, or if it has been 
damaged or dropped. 

•  

The air conditioner should be serviced only by qualified 

service personnel. Call an authorized service company 
for examination, repair, or adjustment. 

•  

Disconnect power before servicing.  

•  

Disconnect power before cleaning. 

NOTE: 

Turning off power by pressing the Power button 

does NOT disconnect the appliance from the power 
supply. 

•  

Do not install or use the air conditioner in any area 

where the atmosphere contains combustible gases 
or where the atmosphere is contaminated. Avoid any 
chemicals coming in contact with your air conditioner. 

•  

Do not store anything directly on top of the air 

conditioner. 

•  

Use two or more people to move and install air 

conditioner. 

•  

Never operate the air conditioner without the filters in 

place. 

•  

Do not use the air conditioner near a bathtub, shower or 

wash basin or other wet area.

 

•  Do not use means to accelerate the defrosting process 

or to clean, other than those recommended by the 
manufacturer.

•  The appliance shall be stored in a room without 

continuously operating ignition sources (for example: 
open flames, an operating gas appliance or an 
operating electric heater.

•  Do not pierce or burn refrigerant tubing. Be aware that 

refrigerants may not contain an odor.

•  Keep ventilation openings clear of obstruction.

•  When handling, installing, and operating the appliance, 

care should be taken to avoid damage to the refrigerant 
tubing.

•  Do not drill holes in the unit.

•  Maintenance, cleaning, and service should only be 

performed by technicians properly trained and qualified 
in the use of flammable refrigerants.

•  GE Appliances does not support any servicing of the air 

conditioner.

•  Dispose of air conditioner in accordance with Federal 

and Local Regulations. Flammable refrigerants require 
special disposal procedures. Contact your local 
authorities for the environmentally safe disposal of your 
air conditioner.

WARNING

Risk of Fire or Explosion.  This unit contains flammable refrigerant.
Additional safety precautions must be followed.

Содержание RAP02









Отзывы: