Consumer
Suppor
t
Troubleshooting
T
ip
s
Operating
Instruction
s
Safety
Instruction
s
Care
and
Cleanin
g
6
Care and cleaning of the vent hood.
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
Hood Lights
NOTE:
The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION
:
Before replacing your
light bulb, disconnect the electrical power
to the hood at the main fuse or circuit
breaker panel.
Be sure to let the light cover and bulb cool
completely.
For your safety, do not touch a hot bulb
with bare hands or a damp cloth.
To remove:
Using gloves or a dry cloth, remove
the bulb by twisting counterclockwise.
To replace:
Use a new 120-volt, 50-watt
(maximum) 50° halogen light made
for a GU10 base, suitable for use in
open luminaries.
Using gloves or a dry cloth, remove
the new bulb from its packaging.
NOTE:
Do not touch the new halogen
bulb with bare fingers. Touching the bulb
with bare fingers will significantly reduce
the life of the bulb.
Push the bulb straight into the
receptacle all the way and turn
clockwise.
Reconnect electrical power to
the hood.