12
49-2000768 Rev. 0
Installation Instructions
PREPARING CABINET: BELOW A COUNTERTOP
Ŷ
When installed, the front face of the warming
drawer will be nearly flush with cabinetry doors or
drawer fronts.
Ŷ 'UDZHURYHUODSVZLOOFRQFHDOFXWHGJHVRQDOOVLGHV
of the opening.
The rough opening for the drawer must be:
²'HSWK
1
/
2
” minimum from inside back to front
of cabinet frame.
²:LGWK
1
/
2
” for 27” wide models
28
1
/
2
” for 30” wide models.
²+HLJKW
1
/
4
”
Ŷ ´PLQLPXPDERYHIORRURUDERYHWRHNLFN
1
/
4
”
from floor to bottom of cutout is recommended for
under countertop installation.
Installation below a cabinet drawer:
The warming drawer may be installed beneath a
cabinet drawer. In this installation, a solid barrier
should be installed above the warming drawer to
EORFNDFFHVV8VHDQ\VROLGPDWHULDOVXFKDV´
thick plywood. Allow at least 1/4” air gap between the
barrier and the top of the warming drawer. Observe
the 5” min. above the floor or 1” above the toekick
min. installation height.
NOTE:
If you are installing in frameless cabinets, it
may be necessary to install 1/2” wide cleats to accept
drawer mounting screws. See drawer to find exact
locations of mounting screws.
When installed under a cooktop:
Warming drawers are suitable for installation below
only certain specified cooktop models. See the label
attached to the top of the warming drawer for suitable
models. A solid barrier and air gap between cooktop
DQGZDUPLQJGUDZHULVUHTXLUHG6HH1RWHDERYH
INSTALLATION INSTRUCTIONS
Electrical outlet 42"
max. from right side
1" Min.*
25"
9"
9
1
/
4
”
23
1
/
2
” Min.
36"
Countertop
height
Electrical
outlet 16” max.
from left side
Electrical outlet
flush with side of
cabinet 7" max.
Install 2x4 or
2x2 anti-tip block
against rear cabinet
wall 9” from floor to
bottom of block
7"
1
1
/
2
” Cabinet top
Install a solid
barrier and a 1/4”
min. air gap above
warming drawer
1/4” Air gap
Solid barrier
Install a solid barrier below
DFRRNWRSVHH1RWH
* NOTE:
When installing the warming drawer below a cooktop, a
solid barrier must be installed at least 1"
from the lowest point of
WKH ERWWRP RI FRRNWRS EXUQHU ER[ WR WKH WRS RI FXWRXW 8VH DQ\
solid material such as 1/4" thick plywood. Allow at least 1/4"
air
gap between the barrier and the top of the warming drawer. See
label on top of the warming drawer for approved cooktop models.
Dimension A
27" Drawer
30" Drawer
25 1/2”
28 1/2”
Содержание PTW9000 Series
Страница 18: ...18 49 2000768 Rev 0 Notes...
Страница 38: ...18 49 2000768 Rev 0 Notas...