GE PTAN9150MWW, Техническое обслуживание руководство

Страница: 16 / 54

16
All models have the PreciseFill Automatic Load Sensing feature. When PreciseFill is
selected, the machine determines fill time by sensing the load size. The Precise Fill
pressure switch minimum level setpoint. The lower level setpoint is attained at
approximately 1 inch of water depth, at which point the washer will start sensing the
load size and determine the optimal amount of water required and corresponding
water level.
Use the Deep Rinse option to add more water during rinse.
3. Washing differently than expected
Load the basket with similar weight items around the sides of the basket.
Overloading the washer can lead to poor cleaning performance.
Check for water supply hoses pushed up tightly against a wall. This can affect the
position of the fill funnel so that water spray isn’t correct during fill. Pull the washer
away from the wall a little to correct.
4. Spots on clothing
Usually caused by too much HE detergent; use less. Use less HE detergent with
softer water. Clothing is cleaned when soapy water bonds to the dirt and is rinsed
away. Too much detergent can generate soapy foam that is difficult to rinse away.
To correct, run a couple of cycles empty with no soap to rinse the machine, and then
run a load with less HE detergent. Use the Deep Rinse option to add more water
during rinse. Check for possible siphoning condition.
5. Wrinkling
Do not overload the washer. Overloading can lead to poor cleaning performance and
increase wrinkling. Infusor models spin faster than standard top-load machines to
extract more water for faster drying and can cause more wrinkling. If wrinkling is a
concern, use the Deep Rinse option to add more water during rinse, and select a
lower spin level for less spin time.