GE PSE26KSESS, Инструкция по использованию и уходу

Страница: 17 / 140

Select CUBED, CRUSHED or WATER.
Press the glass gently against the top
of the dispenser cradle.
The spill shelf is not self-draining. To reduce water
spotting, the shelf and its grille should be cleaned
regularly.
If no water is dispensed when the refrigerator is first
installed, there may be air in the water line system.
Press the dispenser arm for at least two minutes to
remove trapped air from the water line and to fill the
water system. To flush out impurities in the water
line, throw away the first six glassfuls of water.
CAUTION: Never put fingers or any other objects into
the ice crusher discharge opening.
Locking the Dispenser
Press the LOCK or LOCK CONTROLS pad for
3 seconds to lock the dispenser and control panel. To
unlock, press and hold the pad again for
3 seconds.
Dispenser Light
The LIGHT pad turns the night light in the dispenser
on and off. The light also comes on when the
dispenser cradle is pressed. For models with a bulb,
if the light burns out, it should be replaced with a 6
watt 12V maximum bulb. For LED models contact
Factory Service.
Door Alarm
Use Door Alarm to sound if either door is open
for more than 3 minutes. The alarm will stop
once the door is closed. For LCD models, a popup
screen will appear. The alarm can be silenced
by touching the LCD screen.
Touch LED Dispenser Control:
Press the SET FEATURES pad once and DOOR
ALARM will blink. Press ON/OFF and the door alarm
will be set and the icon will turn solid. Press ON/OFF
again to turn the alarm off.
Door Alarm
(on Tactile LED Dispenser Control
model)
To set the alarm,
press this pad until the
indicator light comes on.
This alarm will sound if either
door is open for more than 3
minutes. The light goes out
and the beeping stops when
you close the door.
About the ice and water dispenser.
(on some models)
GEAppliances.com
To Use the Dispenser
Spill Shelf
Precise Fill
(on some models)
Quick Ice
This water dispenser is equipped with a feature
called “precise fill.” This feature allows you to choose
a precise amount of water (cups or ounces) that
you would like dispensed. Pints and Liters are also
available for LCD models.
Touch LED Dispenser Control
Press the PRECISE FILL CUPS/OZ pad.
The WATER pad will light and the CRUSHED
and CUBED ice pads will turn off. The last unit
used will be displayed.
Press the PRECISE FILL pad again to toggle
between cups and ounces.
If you selected OUNCES , press the
>
or
>
pad
to select the number of ounces you would like
to have dispensed between 2–99 ounces.
The default is 8 ounces.
If you selected CUPS , press the
>
or
>
pad to
select the amount you would like to have dispensed.
They are displayed as 1/4, 1/3, 1/2, 2/3 and 3/4, with
the highest amount being 16 3/4 cups. The default
is 1 cup.
Press the cup against the cradle and water will
begin dispensing. It will automatically stop when
the amount set has been dispensed. The display
will show the amount of water dispensed, beep,
then reset after 5 seconds.
NOTE: Do not leave the dispenser unattended when
water is being dispensed.
If you would like to stop dispensing water
before the specified amount has been
dispensed, just remove the cup from the cradle.
The display will show the amount that has been
dispensed for 5 seconds. If the cup switch is
pressed again within that time, the dispenser
will continue up to the set amount. If not, the
display will return to the set amount.
When you need to speed up ice production, use the
Quick Ice feature. While this feature is turned on,
the freezer fan runs continuously for 48 hours, or
until the feature is turned OFF. During this period, ice
production will increase up to 40%. Models with the
integrated ice feature system require at FIRST USE at
least half an 8 oz. glass of ice to be dispensed every 6
to 12 hours. This will help the ice maker fill the bucket
properly so that dispensing is better.
How to Use
Touch LED Dispenser Control:
Press the SET FEATURES pad twice and QUICK ICE
will blink. Press ON/OFF to turn the feature on, then
again to turn it off.
Quick Ice
(on Tactile LED Dispenser Control
model)
When you need ice in a
hurry, press this pad to
speed up ice production. This
will increase ice production
for the following 48 hours
or until you press the pad
again.
17