GE Profile Series, Руководство пользователя и инструкции по установке

Страница: 5 / 56

49-60466-6
5
Glass Shelves
Tempered glass shelves in the beverage center unit
are removable for easy cleaning or for storing larger
items.
To remove a shelf, open the door completely to avoid
potential damage to the gasket. Lift up on the back of
the shelf slightly. Tilt the shelf to one side at an angle
while pulling forward.
To replace a shelf, open the door completely to avoid
potential damage to the gasket. Tilt the shelf to one
side at an angle and slide toward the back wall, placing
one side onto the shelf support. Place the other side
onto the opposite shelf support. Ensure rear locking
tabs are engaged. When installed properly, the shelf
will not slide forward when gently pulled.
To remove, lift up on the
back of the shelf
Loading Tips and Suggestions
• The bottom two full extension drawers hold six
bottles each and are loaded with necks facing the
rear. Tall bottles should not be loaded on the bottom
drawer because they may prevent the door from
closing.
‡ 'RQRWDOORZFKLOGUHQWRFOLPEVWDQGRUKDQJRQWKH
beverage center shelves or full extension drawers.
They could seriously injure themselves and possibly
cause
damage to
the beverage
center.
Bottom drawer arrangement
USING THE
APPLIANCE:
&RQWUROVDQG)HDWXUHV%HYHUDJH&HQWHU
Controls and Features - Beverage Center
Temperature Control
The operating temperatures of the beverage center
range from the low forties to the mid fifties. This
appliance is not a refrigerator and does not maintain
WHPSHUDWXUHVOLNHDUHIULJHUDWRUEHORZƒ)
'RQRWLQVWDOOWKHEHYHUDJHFHQWHUZKHUHWKH
WHPSHUDWXUHZLOOJREHORZƒ)ƒ&RUDERYHƒ)
(32°C).
As with any refrigeration-type product, there is a slight
temperature variance at different locations within the
cabinet.
The coolest area will be in the lower part of the
cabinet.
The cooler area will be in the middle section.
The upper part of the cabinet is the warmest section.
When the temperature is adjusted, allow 24 hours for
WKHXQLWWRVWDELOL]H
To set the control, turn
it to the midpoint setting
DSSUR[LPDWHO\ž)2QFH
the beverage center is
loaded, allow at least 24
hours before making any
adjustments to the initial
setting.
NOTES:
• This unit is designed for storing and cooling
beverages. It is not intended for the storage of
perishable foods.
• The lowest temperatures are found on the lower
shelves/racks and toward the rear of the shelves/
racks.
Tilt the shelf at an angle
while removing or replacing
Place in slots when replacing
the shelf