49-2000833 Rev. 0
5
Controls
USING THE HOOD:
Controls / Chef Connect
1. MEMORY/OFF:
To set the memory:
A
. Press the
MEMORY/OFF
button
B
. Set your desired fan and light settings
C
. Press the
MEMORY/OFF
button again to save
these settings.
With your desired settings in memory, press the
MEMORY/OFF
button to restore the fan and light
levels to their saved settings. These settings will
remain in memory until they are changed or loss of
power occurs.
To turn off the hood, press the MEMORY/OFF
button.
2.
LIGHT:
Press
+
or
–
to increase or decrease light
level to desired setting. There are 2 light levels
(
LOW, HIGH
) and
OFF
. If you continue to press the
+ or – buttons, the light will cycle back through the
settings.
NOTE:
Please check the lamps to ensure only 20W
lamps (maximum) are installed.
3. FAN:
Press
+
or
–
to increase or decrease fan
level to your desired setting. There are 4 fan levels
(
LOW
,
MED
,
HIGH
,
BOOST
) and
OFF
. If you
continue to press the + or – buttons, the fan will
cycle back through the settings.
NOTE:
There is an audible “beep” each time a
button is pressed. This is normal.
NOTE:
The collars around the buttons will
illuminate when pressed. This is normal. The
collars will automatically turn off if the hood is
turned off.
HEAT SENSOR:
This hood is equipped with a heat sensor that will turn
on the fan if excessive temperatures are detected (over
Û&Û)DERYHWKHFRRNLQJVXUIDFH7KHKRRGZLOO
return to its normal operation once the heat sensor
GHWHFWVWHPSHUDWXUHVEHORZÛ&Û)
NOTE:
If the hood is
OFF
or on
LOW
fan speed, the
WHPSHUDWXUHVDERYHÛ&Û)DUHGHWHFWHGWKHQWKH
fan will automatically adjust to
MED
speed. You may
adjust the fan speed to
HIGH
or
BOOST
, but you will
not be able to adjust the fan speed to
LOW
or
OFF
until
WHPSHUDWXUHVEHORZÛ&Û)DUHGHWHFWHG
NOTE:
The collars around the buttons may not illuminate
if the heat sensor is activated. This is normal.
1
3
2
Содержание Profile PV977
Страница 25: ...49 2000833 Rev 0 25 Notes...
Страница 26: ...49 2000833 Rev 0 26 Notes...