Consumer
S
uppor
t
Tr
oubleshooting
Tips
Operating
Instructions
Safety
Instructions
Installation
Instructions
About the temperature controls.
ge.com
The temperature controls are preset in the factory at
37°F
for
the refrigerator compartment and
0°F
for the freezer compartment.
Allow 24 hours for the temperature to stabilize to the preset
recommended settings.
The temperature controls can display both the
SET
temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET
temperature based on usage and operating environment.
NOTE:
The refrigerator is shipped with protective film covering
the temperature controls. If this film was not removed during
installation, remove it now.
The Performance Air-Flow System is designed to
maximize temperature control in the refrigerator
and freezer compartments. This unique special
feature consists of the Air Tower along the back
wall of the refrigerator and the freezer. Placing food
in front of the louvers on these components will not
affect performance.
Performance Air Flow System
To change the temperature,
press and release
the
WARMER
or
COLDER
button.
SET
will illuminate in
the display, as well as the set temperature. To change
the temperature, tap either the
WARMER
or
COLDER
button (while
SET
is illuminated) until the desired
temperature is displayed. Refrigerator temperatures
can be adjusted between 34°F and 47°F and
the freezer temperatures can be adjusted
between –6°F and +8°F.
Once the desired temperature has been set,
the temperature display will clear after 10 seconds.
To display the temperature, the
DISPLAY TEMP
button
may be tapped.
Several adjustments may be required. Each time you
adjust controls, allow 24 hours for the refrigerator to
reach the temperature you have set.
5
