BloWeR eleCTRICAl
CoNNeCTIoNs (cont.)
•
Connect the 5-pin plug on the blower assembly to
the matching 5-pin receptacle on the bottom of the
wire enclosure .
•
Fold all wires into the electrical enclosure . Secure the
enclosure with the screws removed earlier, making
sure that no wires are trapped
.
ATTAChING A BloWeR
TRANsITIoN DuCT
Use a blower transition duct for all downward
duct installations to connect to 6" round standard
ductwork . This 3
1
⁄
4
” x 10” rectangle to 6
≤
round
transition duct is available at your local building
supply store .
Remove the cardboard packing in the blower outlet .
Install the transition duct to the blower outlet . Secure
all joints with duct tape to assure an airtight seal .
24
Screws
Screw
(on other
side)
14
CoNNeCTING The DuCTWoRk
Connect the ductwork prepared in Steps 5 and 6 to
the blower transition duct .
15
16
INsTAllING The CookToP
5-pin
connectors
Electrical
enclosure
Flexible
conduit
5-pin
connectors
Installation Instructions
BloWeR eleCTRICAl
CoNNeCTIoNs
•
Loosen the two screws and remove and discard
the sheet metal strap covering the 5-pin connector
on the cooktop bottom . Save the screws for
reinstallation later .
16
Remove screws
and discard
strap
