Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
35
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Before a Clean Cycle
We recommend venting your kitchen
with an open window or using a
ventilation fan or hood during
the first self-clean cycle.
Remove broiler pan, broiler grid, all
cookware and any aluminum foil from
the oven.
The shiny, silver-colored oven racks
(on some models) can be self-cleaned,
but they will darken, lose their luster
and become hard to slide.
Do not use abrasives or oven cleaners.
Clean the top, sides and outside of the
oven door with soap and water.
Make sure the oven light bulb cover
is in place and the oven light is off.
NOTE:
See the
Cleaning the Oven Door
section in the
Care and Cleaning
section for
instructions on how to clean the inner
door outside the gasket. This area is not
cleaned during the self-clean cycle.
IMPORTANT:
The health of some birds
is extremely sensitive to the fumes given
off during the self-cleaning cycle of
any oven. Move birds to another
well-ventilated room.
Wipe up heavy soil on the oven
bottom. (appearance may vary)
How to Set the Oven for Cleaning
Select
FEATURES
.
Select
SELF CLEAN
.
Select the desired self clean.
A 3-hour self-clean time is
recommended when cleaning small,
contained spills. A self-clean time of
4 hours or longer is recommended
for a dirtier oven.
LO
(3 hrs) will self clean the oven
for 3 hours.
STD
(4 hrs) will self clean the oven
for 4 hours.
ADJUST TIME
allows oven to be set
for any time between 3 and 5 hours.
Input the clean time (to nearest 5
minutes) using the number pads
and select
ENTER
.
Select
START
.
The door locks automatically.
will
flash until door is locked. The display will
show the clean time remaining.
It will not be possible to open the
oven door until the temperature drops
below the lock temperature and the
(LOCK)
light goes off.
When the
(LOCK)
light goes off, you
will be able to open the door.
■
To stop a clean cycle, press the
CLEAR/OFF
pad. When the
(LOCK)
light goes off indicating the oven has
cooled below the locking temperature,
you will be able to open the door.
Using the self-cleaning oven.
ge.com