If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
To reset the clock, touch the
Clock
pad.
Enter the correct time of day by touching
the appropriate number pads. Touch the
Start
pad.
14
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The Clear/Off pad does not affect
the timer.
Not all features are on all models.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking or
self-cleaning cycle.
Touch the
Clock
pad.
Touch the number pads.
Touch the number pads the same way you
read them. For example, to set 12:34, touch
the number pads
1, 2, 3
and
4
in that order.
If number pads are not touched within one
minute after you touch the
Clock
pad, the
display reverts to the original setting. If this
happens, touch the
Clock
pad and reenter
the time of day.
Touch the
Start
pad until the time
of day shows in the display. This enters
the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
Clock pad. The time of day shows until
another pad is touched.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the
Kitchen Timer On/Off
pad.
Touch the number pads until the
amount of time you want shows in
the display. The maximum number
of minutes that can be entered is 59.
To set additional time, you will need
to set it by hours and minutes.
For example, to enter 1 hour and
30 minutes, touch
1, 3 and 0
in
that order.
If you make a mistake, press the Kitchen
Timer On/Off pad and begin again.
Touch the
Start
pad. After pressing
the
Start
pad,
SET
disappears; this tells
you the time is counting down, although
the display does not change until one
minute has passed.
When the timer reaches
:00,
the control
will beep 3 times followed by one beep
every 6 seconds until the
Kitchen Timer
On/Off
pad is touched.
The 6 second tone can be canceled by
following the steps in the Special features
of your oven control section under Tones
at the End of a Timed Cycle.
Using the clock and timer.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the
Kitchen Timer On/Off
pad; then touch
the number pads until the time you want
appears in the display.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the
Kitchen Timer On/Off
pad and
then touching the number pads to enter the
new time you want.
To Cancel the Timer
Touch the
Kitchen Timer On/Off
pad twice.
Power Outage
Operating
Instructions
Safety
Instructions
Car
e
and
Cleaning
Installation
Instructions
Tr
oubleshooting
Tips
Consumer
S
uppor
t
