Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
35
ge.com
To order CERAMA BRYTE
®
Ceramic
Cooktop Cleaner and the cooktop
scraper, please call our toll-free number:
National Parts Center
800.626.2002.
CERAMA BRYTE
®
Ceramic
Cooktop Cleaner
. . . . . . . . . . .# WX10X300
CERAMA BRYTE
®
Ceramic
Cooktop Scraper
. . . . . . . . . . .# WX10X0302
Kit
. . . . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and cooktop scraper)
CERAMA BRYTE
®
Cleaning Pads for
Ceramic Cooktops
. . . . . . . . .# WX10X350
Turn off all surface units. Remove
hot pans.
Wearing an oven mitt:
a.
Use a single-edge razor blade
scraper (CERAMA BRYTE
®
Ceramic Cooktop Scraper) to
move the spill to a cool area on
the cooktop.
b.
Remove the spill with
paper towels.
Any remaining spillover should be
left until the surface of the cooktop
has cooled.
Don’t use the surface units again
until all of the residue has been
completely removed.
NOTE:
If pitting or indentation in the glass
surface has already occurred, the cooktop glass
will have to be replaced. In this case, service will
be necessary.
Damage from Sugary Spills and Melted Plastic
Our testing shows that if you
are cooking high sugar mixtures
such as jelly or fudge and have
a spillover, it can cause
permanent damage to the glass
surface unless the spillover is
immediately removed.
Be careful not to slide pots and
pans across your cooktop. It will
leave metal markings on the
cooktop surface.
These marks are removable using
the CERAMA BRYTE
®
Ceramic
Cooktop Cleaner with the CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops.
If pots with a thin overlay of
aluminum or copper are allowed
to boil dry, the overlay may leave
black discoloration on the cooktop.
This should be removed
immediately before heating
again or the discoloration may
be permanent.
WARNING:
Carefully check the bottom of pans
for roughness that would scratch the cooktop.
Metal Marks and Scratches
To Order Parts
Glass surface—potential for permanent damage
.