– 57 –
5. Release the fan cover bottom 2 tabs from the air
guide by pushing up the bottom of the fan cover
while pulling it toward the front of the oven.
6. Push the top of the fan cover toward the rear of
the oven, then carefully remove it from the oven.
Tab (1 of 2)
Note:
In the following step, the fan blade is rmly
attached to the D-shaped motor shaft. It may be
helpful to use 2 at blade screwdrivers, as shown, to
remove the blade from the motor shaft.
7. Carefully pry up the fan blade from the motor
shaft.
8. Remove the 2 Phillips-head screws that attach
the fan motor to the fan cover.
Stirrer Motor
• Location - Top of the oven cavity.
• 21
VAC
• Approximately
120
:
.
• Part of the Stirrer Assembly.
• The stirrer motor circuit is a series circuit with
the Magnetron Fan Motor. 120 VAC is supplied to
the magnetron fan, the magnetron fan drops 99
VAC, leaving 21 VAC to operate the Stirrer Motor.
Troubleshooting
Check to see if Magnetron Fan Motor is running. If
yes, the problem is with the Stirrer Motor or wiring
(See
Wiring Diagram
.) to motor.
If Magnetron Fan Motor is not running, see
Magnetron Fan Motor
troubleshooting.
Disassembly
(See
Stirrer Motor Removal
.)