– 44 –
Upper Heater Assembly
To remove the Upper Heater Assembly:
1. Remove the Upper Cooling Motor. (See
Upper
Cooling Motor Removal
.)
2. Remove the Air Tunnel Cover. (See
Air Tunnel
Cover
.)
3. Remove the 3 Phillips-head screws that attach
the Air Tunnel Outlet to the oven. (See
Air Tunnel
Outlet
.)
4. Lift and position the Air Tunnel Outlet to the
right.
5. Remove the wiring from the wire ties.
6. Disconnect wires from the 2 halogen TCOs.
7. Disconnect the 2 heater wire harnesses.
8. Using
a
at blade screwdriver, straighten the 2
left side folded lock tabs. Remove 5 Phillips-head
screws from the heater shield.
Disconnect
Disconnect
TCO
TCO
Wire Tie
Wire Tie
Tab (1 of 2)
Screwdriver
11. Lift the heater cover from the top of the oven.
12. Remove 4 Phillips-head screws that attach the
heater to the oven.
Tab
Note:
Insulation is positioned underneath the heater
shield. In the following step, note the position of the
insulation for proper placement when installing the
heater shield.
9. Lift the heater shield from the top of the oven.
10. Using a at blade screwdriver, straighten the
folded lock tab. Remove 3 Phillips-head screws
that attach the heater cover.
Heater Cover
(
Continued Next Page
)